katsumi
8th July 2019, 12:52
http://www.hostpic.org/images/1907072149280109.jpg
3DCS Variation Analyst MultiCAD 7.6.0.1 (x64) | 1.5 Gb
Dimensional Control Systems (DCS), engineering software developer, has released version 7.6 of its flagship tolerance analysis software 3DCS Variation Analyst.
Whai's new in this release:
This new version features enhanced GD&T interfaces and applications, making it easier to model tolerances, validate GD&T and increase analysis granularity. Additional updates include a new method to save multiple model variants, allowing users to switch between model builds with the push of a button.
The GD&T interface has been added and rebuilt to provide a more intuitive process to create GD&T on the model, and validate existing GD&T. Users now have the ability to create GD&T instead of needing to extract the FTA and PMI from the model or create point and feature tolerances. Of course, all versions can utilize extracted PMI from the CAD model, but now offer an easy to use solution for when that data is unavailable. In order to support DCS' clients worldwide, the software comes with the ability to utilize both ISO and ASME standards for GD&T.
Model Variants have been added to the new version of 3DCS. This much requested feature allows users to designate different model builds within the same model. This reduces issues with version control, as well as removing the need for multiple cloned versions of the same model in order to simulate different processes, parts or tolerance schemes. Now, within the same model, users can define different assembly methods, tolerances or GD&T, and measurements for each variant, swapping between them with the push of a button. This makes it easy to model different what-if scenarios, or to model parts and processes from different suppliers. With the added functionality of both multi-core processing and cloud based distributed processing, it becomes a simple process to switch between variants and quickly run analyses to compare outputs.
Below are a list of changes, enhancements and resolved issues based on the entire 3DCSsuite or a specific CAD system available with 3DCS.
Enhancements
Multi-Core: 3DCS can allow users to utilize their available computer cores to improvethe speed and run time, running a Monte Carlo Simulation, GeoFactor Analysis, andAdvanced Analyzer and Optimizer.
GD&T
- The Feature Clocking option will remain activate after selecting and applying.(65152).
- The GD&T Summary page will now display the DRF information correctly.(65218)
- Cylindricity definition will not have any DRF linked in the GD&T. (65203)
- The newly added GD&T using Add Frame will always add the GD&T to thebottom of the list in the Tree. (64867)
Dialog
- Check Duplicates dialog will now display the Name, Types and parents correctly.(65189)
- Running SBS will no more crash the software when other actions are tried toperform (64854)
Validate
- Remove unnecessary error check for pattern rigid in validate. (64648)
File IO
- The 'cst' expression is not added to the file names anymore when generatingmatrices using a batch file in StiffGen.
Issues Resolved (Multi-CAD)
Preferences
- Removed the Configuration saving method in the 3DCS Preferences under the Configuration tab. Settings will be automatically saved after closing 3DCS.
Tree
- When a feature point and its feature are deleted at the same, a size tolerance willnot be created. When a feature point's feature is deleted, the created sizetolerance will be set to deactivated. (65237)
Saving/Loading
- Resolved .fbx export scaling issue. (64780)
Dialog
- The Associate direction in the Force Measure, Force/Torque Move and PatternCompliant Move dialog will get updated instantly on adding, deleting orreordering the features. (63575)
http://www.hostpic.org/images/1907072149290110.jpg
About 3DCS software. 3DCS software is an advanced tolerance analysis package integrated into Dassault Systemes' CATIA, Siemens' NX and PTC's Creo CAD platforms, as well as a standalone CAD neutral platform. As the standard for variation analysis software across the automotive and aerospace industries, 3DCS offers powerful tools for engineers and designers to simulate their product's assembly process and 3D tolerance stack-up to reduce scrap and rework and root cause quality issues that could lead to warranty and liability claims.
This video showcases the inputs and outputs of a 3DCS Variation Analyst model and the benefits of utilizing process data and tolerances.
About Dimensional Control Systems. Dimensional Control Systems Inc. (DCS) based in Troy, Michigan, USA is focused on the methodology of Dimensional Engineering. DCS offers best-in-class software solutions and services to manufacturing companies the world over. With over 50 years of Dimensional Engineering background, DCS continuously strives to exceed our customer's expectations for world-class Variation Analysis and Quality Management System (QMS) software and services.
Product: 3DCS Variation Analyst
Version: MultiCAD 7.6.0.1
Supported Architectures: x64
Website Home Page :
http://www.3dcs.com
Language: english
System Requirements: PC *
Supported Operating Systems: *
Size: 1.5 Gb
Before installing 3DCS Variation Analyst Multi-CAD, verify that your environment meets the necessary requirements:
Minimum
Processor: Intel Core 2 Quad
Memory (RAM): 8GB
Graphics: 1GB
Graphics Card Type: NVIDIA Quadro
Operating System: Windows 7 (x64)
Recommended:
Processor Intel: Intel i7, Intel Xeon
Memory (RAM): 32GB
Graphics: 4GB
Graphics Card Type: NVIDIA Quadro
Operating System: Windows 7,8.1,10 (x64)
Download link:
rapidgator_net:
https://rapidgator.net/file/28163c3b6515455ef8faf2a7a7686d90/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part1.rar.html
https://rapidgator.net/file/a4e1e955527f8875fb6932560da3219f/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part2.rar.html
https://rapidgator.net/file/0bbe7b2f3d74f0bf6f8f7b0cef3514e7/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part3.rar.html
https://rapidgator.net/file/518911a40b48d578d266b1c50bf914d1/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part4.rar.html
https://rapidgator.net/file/1240ae5c5b76c0febf16cafc81c526a8/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part5.rar.html
nitroflare_com:
http://nitroflare.com/view/C4B8DFC59373032/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part1.rar
http://nitroflare.com/view/A47B3915C695CD6/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part2.rar
http://nitroflare.com/view/D85FF9EF3615BF6/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part3.rar
http://nitroflare.com/view/47B1841CD0FFA5C/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part4.rar
http://nitroflare.com/view/C9CDC37090EB3E0/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part5.rar
uploadgig_com:
https://uploadgig.com/file/download/0e59dfd5a60583B2/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part1.rar
https://uploadgig.com/file/download/99A26b21889b08F1/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part2.rar
https://uploadgig.com/file/download/2C0d06b06076195c/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part3.rar
https://uploadgig.com/file/download/6A0c27c63004eF82/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part4.rar
https://uploadgig.com/file/download/42a4954E3af763f2/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part5.rar
Links are Interchangeable - No Password - Single Extraction
3DCS Variation Analyst MultiCAD 7.6.0.1 (x64) | 1.5 Gb
Dimensional Control Systems (DCS), engineering software developer, has released version 7.6 of its flagship tolerance analysis software 3DCS Variation Analyst.
Whai's new in this release:
This new version features enhanced GD&T interfaces and applications, making it easier to model tolerances, validate GD&T and increase analysis granularity. Additional updates include a new method to save multiple model variants, allowing users to switch between model builds with the push of a button.
The GD&T interface has been added and rebuilt to provide a more intuitive process to create GD&T on the model, and validate existing GD&T. Users now have the ability to create GD&T instead of needing to extract the FTA and PMI from the model or create point and feature tolerances. Of course, all versions can utilize extracted PMI from the CAD model, but now offer an easy to use solution for when that data is unavailable. In order to support DCS' clients worldwide, the software comes with the ability to utilize both ISO and ASME standards for GD&T.
Model Variants have been added to the new version of 3DCS. This much requested feature allows users to designate different model builds within the same model. This reduces issues with version control, as well as removing the need for multiple cloned versions of the same model in order to simulate different processes, parts or tolerance schemes. Now, within the same model, users can define different assembly methods, tolerances or GD&T, and measurements for each variant, swapping between them with the push of a button. This makes it easy to model different what-if scenarios, or to model parts and processes from different suppliers. With the added functionality of both multi-core processing and cloud based distributed processing, it becomes a simple process to switch between variants and quickly run analyses to compare outputs.
Below are a list of changes, enhancements and resolved issues based on the entire 3DCSsuite or a specific CAD system available with 3DCS.
Enhancements
Multi-Core: 3DCS can allow users to utilize their available computer cores to improvethe speed and run time, running a Monte Carlo Simulation, GeoFactor Analysis, andAdvanced Analyzer and Optimizer.
GD&T
- The Feature Clocking option will remain activate after selecting and applying.(65152).
- The GD&T Summary page will now display the DRF information correctly.(65218)
- Cylindricity definition will not have any DRF linked in the GD&T. (65203)
- The newly added GD&T using Add Frame will always add the GD&T to thebottom of the list in the Tree. (64867)
Dialog
- Check Duplicates dialog will now display the Name, Types and parents correctly.(65189)
- Running SBS will no more crash the software when other actions are tried toperform (64854)
Validate
- Remove unnecessary error check for pattern rigid in validate. (64648)
File IO
- The 'cst' expression is not added to the file names anymore when generatingmatrices using a batch file in StiffGen.
Issues Resolved (Multi-CAD)
Preferences
- Removed the Configuration saving method in the 3DCS Preferences under the Configuration tab. Settings will be automatically saved after closing 3DCS.
Tree
- When a feature point and its feature are deleted at the same, a size tolerance willnot be created. When a feature point's feature is deleted, the created sizetolerance will be set to deactivated. (65237)
Saving/Loading
- Resolved .fbx export scaling issue. (64780)
Dialog
- The Associate direction in the Force Measure, Force/Torque Move and PatternCompliant Move dialog will get updated instantly on adding, deleting orreordering the features. (63575)
http://www.hostpic.org/images/1907072149290110.jpg
About 3DCS software. 3DCS software is an advanced tolerance analysis package integrated into Dassault Systemes' CATIA, Siemens' NX and PTC's Creo CAD platforms, as well as a standalone CAD neutral platform. As the standard for variation analysis software across the automotive and aerospace industries, 3DCS offers powerful tools for engineers and designers to simulate their product's assembly process and 3D tolerance stack-up to reduce scrap and rework and root cause quality issues that could lead to warranty and liability claims.
This video showcases the inputs and outputs of a 3DCS Variation Analyst model and the benefits of utilizing process data and tolerances.
About Dimensional Control Systems. Dimensional Control Systems Inc. (DCS) based in Troy, Michigan, USA is focused on the methodology of Dimensional Engineering. DCS offers best-in-class software solutions and services to manufacturing companies the world over. With over 50 years of Dimensional Engineering background, DCS continuously strives to exceed our customer's expectations for world-class Variation Analysis and Quality Management System (QMS) software and services.
Product: 3DCS Variation Analyst
Version: MultiCAD 7.6.0.1
Supported Architectures: x64
Website Home Page :
http://www.3dcs.com
Language: english
System Requirements: PC *
Supported Operating Systems: *
Size: 1.5 Gb
Before installing 3DCS Variation Analyst Multi-CAD, verify that your environment meets the necessary requirements:
Minimum
Processor: Intel Core 2 Quad
Memory (RAM): 8GB
Graphics: 1GB
Graphics Card Type: NVIDIA Quadro
Operating System: Windows 7 (x64)
Recommended:
Processor Intel: Intel i7, Intel Xeon
Memory (RAM): 32GB
Graphics: 4GB
Graphics Card Type: NVIDIA Quadro
Operating System: Windows 7,8.1,10 (x64)
Download link:
rapidgator_net:
https://rapidgator.net/file/28163c3b6515455ef8faf2a7a7686d90/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part1.rar.html
https://rapidgator.net/file/a4e1e955527f8875fb6932560da3219f/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part2.rar.html
https://rapidgator.net/file/0bbe7b2f3d74f0bf6f8f7b0cef3514e7/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part3.rar.html
https://rapidgator.net/file/518911a40b48d578d266b1c50bf914d1/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part4.rar.html
https://rapidgator.net/file/1240ae5c5b76c0febf16cafc81c526a8/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part5.rar.html
nitroflare_com:
http://nitroflare.com/view/C4B8DFC59373032/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part1.rar
http://nitroflare.com/view/A47B3915C695CD6/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part2.rar
http://nitroflare.com/view/D85FF9EF3615BF6/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part3.rar
http://nitroflare.com/view/47B1841CD0FFA5C/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part4.rar
http://nitroflare.com/view/C9CDC37090EB3E0/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part5.rar
uploadgig_com:
https://uploadgig.com/file/download/0e59dfd5a60583B2/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part1.rar
https://uploadgig.com/file/download/99A26b21889b08F1/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part2.rar
https://uploadgig.com/file/download/2C0d06b06076195c/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part3.rar
https://uploadgig.com/file/download/6A0c27c63004eF82/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part4.rar
https://uploadgig.com/file/download/42a4954E3af763f2/21v61.3DCS.Variation.Analyst.MultiCAD.7.6.0.1.part5.rar
Links are Interchangeable - No Password - Single Extraction