dlebook
22nd February 2021, 13:04
https://i114.fastpic.ru/big/2021/0222/76/076418aad814dcad9f307ef12d724076.jpeg
Dlubal CRANEWAY 8.25.01 | 747.7 mb
Languages: English, Deutsch, Čeština, Español, Français,
Italiano, Polski, Português, Русский
The CRANEWAY development team is pleased to announce the availability of CRANEWAY 8.25.01 . This program analyzes craneway girders according to: EN 1993‑6:2008‑09 (Eurocode 3), DIN 4132:1981‑02 and DIN 18800:1990‑11. In the case of design according to EN 1993‑6, you can optionally select the crane type (bridge or suspension crane).
https://i114.fastpic.ru/big/2021/0222/d9/960959f5e67cc30274bc4c800894c7d9.jpeg
CRANEWAY expands DLUBAL'S product range by the crane runway girder design. Thanks to the well-known user-friendliness of Dlubal programs, you can carry out even complicated analyses according to EN 1993-6, DIN 4132, and DIN 18800 in an easy and comprehensible way.The crane runway girder is specified in the CRANEWAY module. Based on the defined loadings, the program creates load cases that are combined in load positions. Each load position results in three load combinations. Each load combination is calculated with three loading levels in order to determine the internal forces for the general stress design, the deformation analysis, or the fatigue design. The internal forces are determined according to the second-order analy-sis for warping torsion. With these calculated internal forces, CRANEWAY provides the appro-priate analyses according to EN 1993-6, DIN 4132, or DIN 18800
Webinar: Design of Craneway Girders According to Eurocode 3
Since 1987, Dlubal Software has continuously developed and optimized user-friendly and powerful programs for structural analysis and design.
With more than 280 employees at 9 locations providing continuous software support, Dlubal Software has gained more than 86,000 satisfied users worldwide.
Product: Dlubal CRANEWAY
Version: 8.25.01
Supported Architectures: x64
Website Home Page : www.dlubal.com
Language: multilanguage
System Requirements: PC *
Size: 747.7 mb
Minimum System Requirements
The following system requirements are recommended in order to use Craneway without any difficulties:
* Operating system Windows XP/Vista/7/8
* x86 CPU with 2 GHz
* 2 GB RAM
* DVD-ROM drive for installation (alternatively a network installation is possible)
* 10 GB hard disk capacity, including approximately 1 GB required for installation
* Graphic card with OpenGL acceleration and resolution of 1024 x 768 pixels. Onboard solutions and shared-memory-technologies are not recommended.
Recommend Download Link Hight Speed | Please Say Thanks Keep Topic Live
Uploadgig
https://uploadgig.com/file/download/F4177af88E0ac174/eza1o.Dlubal.CRANEWAY.8.25.01.rar
Rapidgator
https://rapidgator.net/file/c8021d4f53a842073da1d688dacdfe26/eza1o.Dlubal.CRANEWAY.8.25.01.rar.html
NitroFlare
http://nitroflare.com/view/2A7242BE65E4473/eza1o.Dlubal.CRANEWAY.8.25.01.rar
Dlubal CRANEWAY 8.25.01 | 747.7 mb
Languages: English, Deutsch, Čeština, Español, Français,
Italiano, Polski, Português, Русский
The CRANEWAY development team is pleased to announce the availability of CRANEWAY 8.25.01 . This program analyzes craneway girders according to: EN 1993‑6:2008‑09 (Eurocode 3), DIN 4132:1981‑02 and DIN 18800:1990‑11. In the case of design according to EN 1993‑6, you can optionally select the crane type (bridge or suspension crane).
https://i114.fastpic.ru/big/2021/0222/d9/960959f5e67cc30274bc4c800894c7d9.jpeg
CRANEWAY expands DLUBAL'S product range by the crane runway girder design. Thanks to the well-known user-friendliness of Dlubal programs, you can carry out even complicated analyses according to EN 1993-6, DIN 4132, and DIN 18800 in an easy and comprehensible way.The crane runway girder is specified in the CRANEWAY module. Based on the defined loadings, the program creates load cases that are combined in load positions. Each load position results in three load combinations. Each load combination is calculated with three loading levels in order to determine the internal forces for the general stress design, the deformation analysis, or the fatigue design. The internal forces are determined according to the second-order analy-sis for warping torsion. With these calculated internal forces, CRANEWAY provides the appro-priate analyses according to EN 1993-6, DIN 4132, or DIN 18800
Webinar: Design of Craneway Girders According to Eurocode 3
Since 1987, Dlubal Software has continuously developed and optimized user-friendly and powerful programs for structural analysis and design.
With more than 280 employees at 9 locations providing continuous software support, Dlubal Software has gained more than 86,000 satisfied users worldwide.
Product: Dlubal CRANEWAY
Version: 8.25.01
Supported Architectures: x64
Website Home Page : www.dlubal.com
Language: multilanguage
System Requirements: PC *
Size: 747.7 mb
Minimum System Requirements
The following system requirements are recommended in order to use Craneway without any difficulties:
* Operating system Windows XP/Vista/7/8
* x86 CPU with 2 GHz
* 2 GB RAM
* DVD-ROM drive for installation (alternatively a network installation is possible)
* 10 GB hard disk capacity, including approximately 1 GB required for installation
* Graphic card with OpenGL acceleration and resolution of 1024 x 768 pixels. Onboard solutions and shared-memory-technologies are not recommended.
Recommend Download Link Hight Speed | Please Say Thanks Keep Topic Live
Uploadgig
https://uploadgig.com/file/download/F4177af88E0ac174/eza1o.Dlubal.CRANEWAY.8.25.01.rar
Rapidgator
https://rapidgator.net/file/c8021d4f53a842073da1d688dacdfe26/eza1o.Dlubal.CRANEWAY.8.25.01.rar.html
NitroFlare
http://nitroflare.com/view/2A7242BE65E4473/eza1o.Dlubal.CRANEWAY.8.25.01.rar