katsumi
19th March 2021, 13:56
https://i114.fastpic.ru/big/2021/0319/25/596b5194c0d71cbf88f4a35765eba825.jpeg
TMG Solvers (Revision 2021-03-11) Updates | 425.2 mb
The Siemens Digital Industries Software development team has released an updated versions to module TMG Thermal/Flow Simulation (NXCAE_EXTRAS) is used to advanced modeling of heat transfer and flow of liquid and gas flows in NXSeries software.
TMG Version 2020.2.10
** Bug
* [TF-9503] - Incorrect values in heat maps report for simulations run in parallel
* [TF-9614] - Thermal model containing PARAM REDUCE cards fails in the ANALYZ module
* [TF-9619] - XMLTEST122 QA fails in the NX2TMG module when running in debug mode
* [TF-9729] - Thermal model with invalid solar heating selection fails in the VUFAC module
* [TF-9759] - Thermal model exhibits unphysical cold spots in temperature distribution with the FE method
** Improvement
* [TF-9638] - Remove unnecessary ghost node synchronization calls from the operator that computes RFR properties
TMG Version 2021.1.3
** Bug
* [TF-8719] - Implement a fatal error when protective layers are applied to plane stress elements
* [TF-9347] - DATACH module produces unexpected fatal error when a thermal stream is applied to a cylindrical face
* [TF-9361] - Initial conditions mapping fails when results directory contains more than 244 characters
* [TF-9398] - Increments are not located within the right step bin in post for a model containing a mix of transient and steady state solution steps
* [TF-9454] - Individual transient bun files should not be generated for a Simcenter 3D Multiphysics mapping solution with a transient source results file
* [TF-9470] - Duplicate results are written to the first step bin in post for a model containing a mix of transient and steady state solution steps
* [TF-9504] - Implement a fatal error when an enclosure radiation request is applied to an edge between two axisymmetric elements
* [TF-9506] - Inaccuracies between the source and target temperatures for 2D-3D mapping
* [TF-9513] - Error related to the Descriptionly.js file is returned when the Solution_Monitor_Graphs.html is opened in a browser
* [TF-9584] - CPP values are converted to a CPP vs TEMP table and CAPAPH values are set to CPP values for materials that have no phase change properties defined
* [TF-9599] - Reference frame number is not properly set for face elements in the parallel flow solver
* [TF-9607] - Protective layers OPTICAL property is incorrect in INPF file
** New Feature
* [TF-9432] - Improve messaging in the REPF and log files for the mass imbalance project
https://i114.fastpic.ru/big/2021/0319/ab/33992b5be5dfb5e6d87eeb8f2997adab.jpeg
TMG Thermal/Flow Simulation (NXCAE_EXTRAS) moduleprovides heat transfer solutions and is an add-on module to either NX Advanced FEM or NX Advanced Simulation. NX Thermal can simulate conduction, convection and radiation phenomena for complex products and large assemblies. NX Thermal is used to address thermal analysis requirements in a wide range of industries including aerospace and defense, automotive and transportation, consumer products and appliances, energy, medical, electronics and semiconductors. In addition, NX Thermal can also be used with NX Flow, the NX-integrated CFD solution, for coupled thermo-fluid simulation.
NX Thermal continues Siemens' long heritage in thermal simulation and leverages the same technology that underpinned the I-deas TMG solution. NX Thermal uses high-order finite volume-based technology on a FE mesh to accurately and efficiently simulate heat transfer phenomenon. It combines the versatility of FE-based analysis with the accuracy of a finite volume scheme. The NX Thermal solver technology allows simulation of NX parts and assemblies within complex thermal environments.
Siemens Digital Industriesis an innovation and technology leader in industrial automation and digitalization. In close cooperation with our partners and customers, we are the driving force for the digital transformation in the discrete and process industries.
Product:TMG Solvers
Version:(Revision 2021-03-11) Updates *
Supported Architectures:x64
Website Home Page :
http://www.plm.automation.siemens.com]www.plm.automation.siemens.com
Language:english
System Requirements:PC **
Software Prerequisites:Siemens NX 1926/1953 with NXCAE_EXTRAS module
Size:425.2 mb
tmg v2020.2.10 for NX-1926 Series (1926-1946.x) Win64 (2021-03-11)
tmg v2021.1.4 for NX-1953 Series (1953-1973.x) Win64 (2021-03-11)
When running module TMG Thermal/Flow Simulation (NXCAE_EXTRAS) in the NXseries platforms, the minimum requirements are superseded by the minimum requirements listed for those platforms.
Download link:
rapidgator_net:
https://rapidgator.net/file/ca8023cb141bfa7a9dddd0487c762b02/jfykf.NX1926Series.rar.html
https://rapidgator.net/file/5e5e6264033f48313a6053d135f4ce43/jfykf.NX1953Series.rar.html
nitroflare_com:
https://nitroflare.com/view/237C5DC8A825483/jfykf.NX1926Series.rar
https://nitroflare.com/view/B4CB3CC28784780/jfykf.NX1953Series.rar
uploadgig_com:
https://uploadgig.com/file/download/0D8e78a11f1b92eC/jfykf.NX1926Series.rar
https://uploadgig.com/file/download/D397b3466d194ac8/jfykf.NX1953Series.rar
Links are Interchangeable - No Password - Single Extraction
TMG Solvers (Revision 2021-03-11) Updates | 425.2 mb
The Siemens Digital Industries Software development team has released an updated versions to module TMG Thermal/Flow Simulation (NXCAE_EXTRAS) is used to advanced modeling of heat transfer and flow of liquid and gas flows in NXSeries software.
TMG Version 2020.2.10
** Bug
* [TF-9503] - Incorrect values in heat maps report for simulations run in parallel
* [TF-9614] - Thermal model containing PARAM REDUCE cards fails in the ANALYZ module
* [TF-9619] - XMLTEST122 QA fails in the NX2TMG module when running in debug mode
* [TF-9729] - Thermal model with invalid solar heating selection fails in the VUFAC module
* [TF-9759] - Thermal model exhibits unphysical cold spots in temperature distribution with the FE method
** Improvement
* [TF-9638] - Remove unnecessary ghost node synchronization calls from the operator that computes RFR properties
TMG Version 2021.1.3
** Bug
* [TF-8719] - Implement a fatal error when protective layers are applied to plane stress elements
* [TF-9347] - DATACH module produces unexpected fatal error when a thermal stream is applied to a cylindrical face
* [TF-9361] - Initial conditions mapping fails when results directory contains more than 244 characters
* [TF-9398] - Increments are not located within the right step bin in post for a model containing a mix of transient and steady state solution steps
* [TF-9454] - Individual transient bun files should not be generated for a Simcenter 3D Multiphysics mapping solution with a transient source results file
* [TF-9470] - Duplicate results are written to the first step bin in post for a model containing a mix of transient and steady state solution steps
* [TF-9504] - Implement a fatal error when an enclosure radiation request is applied to an edge between two axisymmetric elements
* [TF-9506] - Inaccuracies between the source and target temperatures for 2D-3D mapping
* [TF-9513] - Error related to the Descriptionly.js file is returned when the Solution_Monitor_Graphs.html is opened in a browser
* [TF-9584] - CPP values are converted to a CPP vs TEMP table and CAPAPH values are set to CPP values for materials that have no phase change properties defined
* [TF-9599] - Reference frame number is not properly set for face elements in the parallel flow solver
* [TF-9607] - Protective layers OPTICAL property is incorrect in INPF file
** New Feature
* [TF-9432] - Improve messaging in the REPF and log files for the mass imbalance project
https://i114.fastpic.ru/big/2021/0319/ab/33992b5be5dfb5e6d87eeb8f2997adab.jpeg
TMG Thermal/Flow Simulation (NXCAE_EXTRAS) moduleprovides heat transfer solutions and is an add-on module to either NX Advanced FEM or NX Advanced Simulation. NX Thermal can simulate conduction, convection and radiation phenomena for complex products and large assemblies. NX Thermal is used to address thermal analysis requirements in a wide range of industries including aerospace and defense, automotive and transportation, consumer products and appliances, energy, medical, electronics and semiconductors. In addition, NX Thermal can also be used with NX Flow, the NX-integrated CFD solution, for coupled thermo-fluid simulation.
NX Thermal continues Siemens' long heritage in thermal simulation and leverages the same technology that underpinned the I-deas TMG solution. NX Thermal uses high-order finite volume-based technology on a FE mesh to accurately and efficiently simulate heat transfer phenomenon. It combines the versatility of FE-based analysis with the accuracy of a finite volume scheme. The NX Thermal solver technology allows simulation of NX parts and assemblies within complex thermal environments.
Siemens Digital Industriesis an innovation and technology leader in industrial automation and digitalization. In close cooperation with our partners and customers, we are the driving force for the digital transformation in the discrete and process industries.
Product:TMG Solvers
Version:(Revision 2021-03-11) Updates *
Supported Architectures:x64
Website Home Page :
http://www.plm.automation.siemens.com]www.plm.automation.siemens.com
Language:english
System Requirements:PC **
Software Prerequisites:Siemens NX 1926/1953 with NXCAE_EXTRAS module
Size:425.2 mb
tmg v2020.2.10 for NX-1926 Series (1926-1946.x) Win64 (2021-03-11)
tmg v2021.1.4 for NX-1953 Series (1953-1973.x) Win64 (2021-03-11)
When running module TMG Thermal/Flow Simulation (NXCAE_EXTRAS) in the NXseries platforms, the minimum requirements are superseded by the minimum requirements listed for those platforms.
Download link:
rapidgator_net:
https://rapidgator.net/file/ca8023cb141bfa7a9dddd0487c762b02/jfykf.NX1926Series.rar.html
https://rapidgator.net/file/5e5e6264033f48313a6053d135f4ce43/jfykf.NX1953Series.rar.html
nitroflare_com:
https://nitroflare.com/view/237C5DC8A825483/jfykf.NX1926Series.rar
https://nitroflare.com/view/B4CB3CC28784780/jfykf.NX1953Series.rar
uploadgig_com:
https://uploadgig.com/file/download/0D8e78a11f1b92eC/jfykf.NX1926Series.rar
https://uploadgig.com/file/download/D397b3466d194ac8/jfykf.NX1953Series.rar
Links are Interchangeable - No Password - Single Extraction